VMC 6030B-II CNC VERTICAL MACHINING CENTER with FADAL 64MP CNC CONTROLLER
Fadal’s VMC-6030B-II Series vertical machining center is built for large parts and heavy metal removal. The machine is designed to deliver high material removal rates and reduced part cycle times while holding increased positioning accuracy and repeatability. This machine weighs ove 30,000 lbs and its heavy four box-way design results in maximum vibration dampening. The box ways are hardened, ground and utilize non-metallic liners that are virtually friction-free on all way and gibs surfaces to ensure vibration-free cutting for consistently closer tolerances.
Specification Sheet| Travel | |
| X-axis Travel (in.) | 60 |
| Y-axis Travel (in.) | 32 |
| Z-axis Travel (in.) | 30 |
| Spindle nose to table (in.) | 5-35/13-43* |
| Spindle center to column (in.) | 30.2 |
| Table | |
| Table Dimensions (in.) | 61 x 30 |
| T-Slot Dimensions (in.) | (5) 5.5 x .709 x 1.25 |
| Max. Table Load (lbs.) | 4,400 |
| Spindle | |
| Spindle Type | CAT-40/BT-40** |
| Spindle Speed (RPM) | 10,000/15,000** |
| Spindle Torque (ft. lbs.) | 225 |
| Spindle Motor (HP) Peak | 22.5 |
| Feed | |
| Rapid Traverse Rate X,Y & Z (IPM) | 787 / 787 / 590 |
| Ballscrew Diameter X,Y & Z Axis (mm) | 50 |
| ATC | |
| Tool Capacity | 24/30**/40** |
| Tool Change Type | Dual Arm |
| Max. Tool Weight (lbs.) | 15 |
| Max. Tool Diameter (in.) (with adjacent tool) | 4.9 (3.1) |
| Max. Tool Length (in.) | 13.8 |
| Tool Selection Method | Random |
| Other | |
| Machine dimensions L x W x H (in.) | 166 x 138 x 132 |
| with Chip Conveyor | 220 x 138 x 132 |
| Machine weight (lbs.) | 32,400 |
• Specifications are subject to change without notice
*Optional
**Optional 8" Riser Block
- Box Way Construction
- Spindle Oil Cooler
- 3 LED Work Lamps (2 Bar/1 Round)
- Fully Enclosed
- Spindle Air Blast
- Automatic PDI Lubrication System
- Operation Indication Lamp
- Rigid Tapping
- 3-Way Chip Augers
- High Torque (22.5hp peak)
- Chip Wash Down System
- Remote MPG
OPTIONAL FEATURES
- Chip Conveyor
- BT40
- 4th Axis Ready
- 5th Axis Ready
- RTCP
- FR-8, FR-10, FR-15 Rotary Table
- FTR-8 Tilting Table
- 30 position and 40 position
- DATC
OPTIONAL PROBING
- Tool Pre-Setter (wired)
- Tool Pre-Setter (wireless)
- X, Y, Z Coordinate (wireless)
Backward Compatible to 88HS & MP- Memory 512mb
- 2,500 Blocks/sec Look Ahead
- Networking & USB Ports
- High Speed Machining