VMC 3320R-II CNC VERTICAL MACHINING CENTER with FADAL 64MP CNC CONTROLLER

Fadal’s VMC-3016R Classic Series vertical machining center is built for smaller size and light duty parts. The machine is designed to deliver high material removal rates, and reduced part cycle times while holding increased positioning accuracy and repeatability. Its roller-way design results in maximum vibration dampening and ensures vibration-free cutting for consistently closer tolerances.

Specification Sheet

Travel
X-axis Travel (in.)	33
Y-axis Travel (in.)	20
Z-axis Travel (in.)	20/30*
Spindle nose to table (in.)	5-25/5-35*
Spindle center to column (in.)	21.25
Table
Table Dimensions (in.)	39.38 x 17.7
T-Slot Dimensions (in.)	(3) 5 x .709 x 1.25
Max. Table Load (lbs.)	1,100
Spindle
Spindle Type	CAT-40/BT-40*
Spindle Speed (RPM)	10,000/15,000*
Spindle Torque (ft. lbs.)	175/220*
Spindle Motor (HP) Peak	15/22.5*
Feed
Rapid Traverse Rate X,Y & Z (IPM)	1,410 / 1,410 / 1,187
Ballscrew Diameter X,Y & Z Axis (mm)	40
ATC
Tool Capacity	24/30*
Tool Change Type	Dual Arm
Max. Tool Weight (lbs.)	15
Max. Tool Diameter (in.) (with adjacent tool)	4.9 (3.1)
Max. Tool Length (in.)	13.5
Tool Selection Method	Random
Other
Machine dimensions L x W x H (in.)	109 x 87 x 110
with Chip Conveyor	155 x 87 x 110
Machine weight (lbs.)	11,330