VMC 2015 HS-II CNC VERTICAL MACHINING CENTER with FADAL 64MP CNC CONTROLLER
Fadal’s VMC-2015R-II Series vertical machining center is built for smaller size and light duty parts. The machine is designed to maximize the machining area in a small footprint machine. Its high speed spindle, fast rapid travel combined with a 1 sec tool change serve to reduce part cycle times while holding increased positioning accuracy and repeatability. Its linear ways design results in maximum vibration dampening and ensures vibration-free cutting for consistently closer tolerances.
Specification Sheet| Travel | |
| X-axis Travel (in.) | 20 |
| Y-axis Travel (in.) | 15 |
| Z-axis Travel (in.) | 16 |
| Spindle nose to table (in.) | 5.9 to 21.6 |
| Spindle center to column (in.) | 16.9 |
| Table | |
| Table Dimensions (in.) | 25.6 x 15 |
| T-Slot Dimensions (in.) | (3) 3.94 x .709 |
| Max. Table Load (lbs.) | 440 |
| Spindle | |
| Spindle Type | BT-30 |
| Spindle Speed (RPM) | 12,000/15,000*/20,000* |
| Spindle Torque (ft. lbs.) | 43.5 |
| Spindle Motor (HP) Peak | 10/7.5 |
| Feed | |
| Rapid Traverse Rate X,Y & Z (IPM) | 1,890 |
| Ballscrew Diameter X,Y & Z Axis (mm) | 32 |
| ATC | |
| Tool Capacity | 20 |
| Tool Change Type | Dual Arm |
| Tool Change Time (sec.) | 1.0 tool to tool |
| Max. Tool Weight (lbs.) | 6.6 |
| Max. Tool Diameter (in.) (with adjacent tool) | 4 (2.4) |
| Max. Tool Length (in.) | 7.9 |
| Tool Selection Method | Random |
| Other | |
| Machine dimensions L x W x H (in.) | 60 x 94 x 94 |
| Machine weight (lbs.) | 6,160 |
• Specifications are subject to change without notice
*Optional
- Spindle Oil Cooler
- LED Work Lamp
- Fully Enclosed
- Spindle Air Blast
- Automatic PDI Lubrication System
- Operation Indication Lamp
- Rigid Tapping
- Chip Wash Down System
- Linear Roller Bearing Ways
OPTIONAL FEATURES
- 4th Axis Ready
- FR-5C Rotary Table
- 15K RPM Spindle
- 20K RPM Spindle
- 24K RPM Spindle
OPTIONAL PROBING
- Tool Pre-Setter (wired)
- Tool Pre-Setter (wireless)
- X, Y, Z Coordinate (wireless)
Backward Compatible to 88HS and 32MP Control- Memory 256mb
- 2000 Blocks/sec Look Ahead
- Networking & USB Ports
- High Speed Machining