Large Work Envelope
MAG Fadal VMC 6535 40 Taper machine has X, Y, Z axis travels of 65" (1650mm) x 35" (890mm) x 34" (1650 x 890 x 863mm).
Dynamic Stability
This machine is built with a massive amount of cast iron with large box ways for maximum dynamic stability for aggressive metal cutting applications.
Four-Box Way Bed
Box way construction on all three axes provides the rigidity and vibration dampening needed for heavy cutting at extreme axis travels. Because of larger X & Y axis travels, the base was engineered to support large, heavy part applications. Reserve support is provided on the expansive base when needed with a four-box way bed.
Robust Axis Drive System
Large 63 mm diameter ball screws, large motors and a conservative lead pitch gives more than 5,000 pounds of axis thrust per axis while maintaining high rapid traverse rates of 900 inches per minute.
Spindle Drive Systems
The 6535 can be configured with a 10,000 rpm 40 taper or a 7,500 rpm 50 taper spindle drive system. The 40 taper VMC is just over 28,000 lbs. and the 50 taper configuration just over 32,000 lbs.
Vector Drive
A leading-edge AC Vector Drive system with a high torque 22.5 HP* spindle motor delivers 220 ft/lbs. of peak torque and maintains consistent torque over the full RPM range from 10-10,000 RPM with closed loop feedback.
Two Speed Spindle Drive System
The automatic two-speed spindle drive system features a mechanical, two-speed gearless system that delivers higher performance at a wider range of RPM, which results in reduced noise, heat, vibration and power loss associated with gear boxes.
For detailed specification on VMC 6535-40T with Fadal MP CNC click here
For detailed specification on VMC 6535-40T with GE Fanuc 18i-MB5 click here
