VMC 8030B-II CNC VERTICAL MACHINING CENTER with FADAL 64MP CNC CONTROLLER

VMC 8030CastVMC 8030BFadal’s VMC-8030B-II Series vertical machining center is built for large parts and heavy metal removal. The machine is designed to deliver high material removal rates, and reduced part cycle times while holding increased positioning accuracy and repeatability. This machine weighs 30,000 lbs and its heavy four box-way design result in maximum vibration dampening. The box ways are hardened, ground and utilize non-metallic liners that are virtually friction-free on all way and gibs surfaces to ensure vibration-free cutting for consistently closer tolerances.

Travel
X-axis Travel (in.) 80
Y-axis Travel (in.) 32
Z-axis Travel (in.) 30
Spindle nose to table (in.) 5-35
Spindle center to column (in.) 34.375
Table
Table Dimensions (in.) 81.5 x 30
T-Slot Dimensions (in.) (5) 5.5 x .709 x 1.25
Max. Table Load (lbs.) 4,800
Spindle
Spindle Type CAT-40/BT-40*
Spindle Speed (RPM) 10,000/15,000
Spindle Torque (ft. lbs.) 225
Spindle Motor (HP) Peak 22.5
Feed
Rapid Traverse Rate X,Y & Z (IPM) 787 / 787 / 590
Ballscrew Diameter X,Y & Z Axis (mm) 50
ATC
Tool Capacity 24/30*/40*
Tool Change Type Dual Arm
Max. Tool Weight (lbs.) 15
Max. Tool Diameter (in.) (with adjacent tool) 4.9 (3.1)
Max. Tool Length (in.) 13.8
Tool Selection Method Random
Other
Machine dimensions L x W x H (in.) 218 x 138 x 132
with Chip Conveyor 272 x 138 x 132
Machine weight (lbs.) 34,600

• Specifications are subject to change without notice
*Optional

Standard Features for VMC-2015

  • Box Way Construction
  • Spindle Oil Cooler
  • 3 LED Work Lamps (2 Bar/1 Round)
  • Fully Enclosed
  • Spindle Air Blast
  • Automatic PDI Lubrication System
  • Operation Indication Lamp
  • Rigid Tapping
  • 3-Way Chip Augers
  • High Torque (22.5hp peak)
  • Remote MPG

OPTIONAL FEATURES

  • Chip Conveyor
  • BT40
  • 4th Axis Ready
  • 5th Axis Ready
  • RTCP
  • FR-8, FR-15 Rotary Table
  • FTR-8 Tilting Table
  • 30 position and 40 position
  • DATC
  • Chip Wash Down System

OPTIONAL PROBING

  • Tool Pre-Setter (wired)
  • Tool Pre-Setter (wireless)
  • X, Y, Z Coordinate (wireless)
  • 64MP FLATBackward Compatible to 88HS and 32MP Control
  • Memory 256mb
  • 2000 Blocks/sec Look Ahead
  • Networking & USB Ports
  • High Speed Machining

Contact Information

map
3160 Enterprise Street, Unit C,
Brea, CA 92821
phone
844.323.2526
mail

Sign up to hear more about Fadal Machines.

Add your email address below if you are interested in hearing more about Fadal

Please enter your name.
Please let us know your company name.
Please enter a valid email address.
Please enter your phone number.
Please let us know your city and state.
Invalid Input